- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- Liens amicaux
- Maison > Fournir > Xiangyang usine directe de forte puissance à haute tension thyristor triac assurance qualité 15271008786
Nom de l'information: | Xiangyang usine directe de forte puissance à haute tension thyristor triac assurance qualité 15271008786 |
Publié: | 2013-11-22 |
Validité: | 365 |
Caractéristiques: | 5456 |
Quantité: | 1.00 |
Description Prix: | |
Description détaillée du produit: | Aussi connu sous haute pression RCS thyristor, thyristor élément redresseur est appelé, est une jonction PN avec structure en trois à quatre couches de semi-conducteurs de haute puissance. RCS peut fonctionner à haute tension, courant élevé, haute fréquence, pour les commutateurs de haute puissance à courant continu, puissance de traitement de l'impulsion électrique, la puissance laser et modulateur de radar et d'autres circuits à haute tension, de grande capacité, petite taille , poids léger, rendement élevé, longue durée de vie, facile à contr?ler, etc, est l'un des dispositifs semi-conducteurs les plus couramment utilisés sont largement utilisés dans le contr?le de commande automatique, de la mécatronique, les appareils électriques et la maison industriels et ainsi de suite. Actuellement divisé en: thyristors à sens unique, triac, thyristor de commande de lumière, inverser la conduite thyristors, GTO, thyristor rapide, etc Haute SCR Caractéristiques du produit: 1, l'ensemble du processus de diffusion 2, l'expansion distribué amplifier la porte 3, les pertes de commutation faibles 4, d'excellentes caractéristiques dynamiques 5, d'excellentes performances à haute fréquence, la fréquence applicable 2,5 kHz-10kHz 6, plat cas avec isolant céramique 7, double face refroidi à haute tension à thyristors applications typiques: 1, 2 onduleurs, soudage 3 chopper 4, le capteur 5, les différents types d'onduleur à thyristors haute tension contraints de refroidissement et Conditions environnementales: 1 à air pulsé: vitesse du vent ≥ 6 m / s, température de l'air ≤ 40 ℃, 2, eau: Débit ≥ 4L/mm, pression 0,2 ± 0.03Mpa. Température de l'eau ≤ 35 ℃ eau résistivité ≥ 20KΩ.cm, de valeur HP 6-8;. 3, puisque la température ambiante froide et froid négatif -40 ℃ -40 ℃ refroidi à température ambiante 5 ℃ -40 ℃;. 4, l'humidité relative de l'air ≤ 85%; 5 gaz, non corrosifs dans l'air et détruire la poussière d'isolation, 6, pression de 86 106Kpa, 7, aucune vibration ou un choc sévère, 8, si l'occasion spéciale, le test approprié doit être effectuée afin de prouver d'une manière fiable pour travailler peuvent être utilisés. Haute SCR Note: 1, préciser le modèle de votre produit, la structure (boulons, des unités concaves, les patrons), configurer les modèles de radiateur. 2, indiquent les paramètres nécessaires vous souciez plus. 3, sélectionnez le courant et la tension devrait laisser une marge appropriée; 4, la ligne doit avoir des mesures de surtension de surintensité de protection, en série et en parallèle doit avoir à la fois la mesure de débit. 5, de déterminer si l'appareil est simple avec un multimètre dégats: Portes résistance de cathode devrait être une dizaine de dizaines de Ω, sinon la porte a été court-circuité ou ouvert. Résistance entre l'anode et la cathode, doit être supérieure à 1MOhm, (redresseur avant sauf), la résistance est inférieure à 1MOhm indiquer que l'appareil propriétés d'isolation extrêmement pauvres, la résistance presque 0h00 indique que le dispositif a une panne. Identification des thyristors haute tension par ma société pour déterminer la qualité des produits en question, Paul se rend à changer. Retours sont tenus de procéder à la certification d'origine du produit. Description: 1, IGTVGTIH valeur de test de 25 ° C, sauf indication contraire, la liste des paramètres à d'autres paramètres TJM sont la valeur de test. 2 I2t = I2TSM × tw / 2; tw = onde sinuso?dale moitié largeur du fond actuel. Sous 50Hz, I2t = 0.005I2TSM (A2s) 3, lorsqu'il est utilisé en courant 60 Hz cas: ITSM (8,3 ms) = ITSM (10ms) × 1.066, Tj = Tjm I2t (8,3 ms) = I2t (10ms) × 0,943 , Tj = Tjm 4, VTO: tension de seuil, la RT résistance de pente 5, la porte mène: blanc ou incolore; conducteur de cathode (si nécessaire): Rouge 6, fm est la fréquence de fonctionnement la plus élevée, veuillez préciser lors de la commande fréquence fm; 2.di/dt silicium mono-impulsion valeur Xiangyang mer Electronics Co., Ltd produit principalement des thyristors de forte puissance (série KK, série KP, série KS, la gamme de 0,5 à 5 pouces de diamètre, plage de courant 200A-4000A, plage de tension 400V- 7200V); module semi-conducteur haute puissance (série MTC, série MFC, série MDS, série MTG, la gamme actuelle: 26A-1500A, plage de tension: 400V-4500V); composants semi-conducteurs de puissance, radiateurs électriques et d'autres semi-conducteurs. Hotline nationale au 400 -090-0008 site officiel 0710-3751391 de société: http://www.guihai.net/ Sales Manager Tel: 15271008786 QQ: 1437577031 |
Vous êtes le 14111 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yangyang Electronics Co., Ltd Mer Silicon Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie